GVDA 3 in 1 Digital Oscilloscope 12MHz Analog Bandwidth Smart Multimeter Rechargeable Multimetro Signal Generator Voltage Tester

GVDA 3 in 1 Digital Oscilloscope 12MHz Analog Bandwidth 6000 Counts Smart Multimeter Rechargeable Multimetro Auto Current Voltage Tester Signal Source

1.50Msps high-speed sampling chip 12MHz analog bandwidth 6000 counts digital multimeter.

2.One key to see the wave of voltage gear, three waveform scanning modes such as automatic/conventional/single.

3.Signal source outputs three types of waveform, such as sine, triangle and square waveform.

4.Signal source output range, frequency, duty cycle, fixed point, adjustable.

5.Configured with replaceable 18650 lithium batteries, more environmentally friendly.

6.Data waveform hold function during measurement, 100 sets of data and 10 waveform can be stored.

7.Waveform range up to 200V/grid, The highest up to 1600Vpp measurement. 8.Relative value measurement, effectively eliminating lead resistance, distributed capacitance or interference signals.

9.Multimeter functions include voltage,current,resistance,capacitance, frequency, duty cycle, diode/on/off testing.

10.Automatic/manual range switching, displaying real-time data and stored data on the same screen.

11.Overload protection 750mA; 10A double fuse,double protection instrument.

12.15 minutes no operation auto-sleep function.

13.2.4 inch color screen display, clear display.

14.Panel calibration, memory calibration factor without potentiometer adjustment, higher reliability.

General parameters

Display:240*320 Color Screen

Observation area:49.0*36.7mm

Backlight:Ever Bright

Input resistance: 500mV/div~200V/div about 5MΩ，50mV/div~200mV/div about 1MΩ

Battery:One 18650 lithium battery(1500mAH)

Automatic sleep:15 minutes or disabled

Static operating current:Multimeter about 80mA,Oscilloscope about 300mA

Shutdown:＜10uA

Duration of continuous use: ＞8 小时

Save Capability:100 records of DMM data, 10 records of OSC waveforms

Usage environment: 0°C~+40°C;<75%RH

Storage conditions: -10°C ~ +60°C ; <90%RH

Product size:83*160*32mm

Product weight:250g

Charging:5V/1A,Type-C

Package contents:1*Oscilloscope,1*test pen,1*cloth bag,1*manual

Oscilloscope parameters

Simulation bandwidth: DC~8MHz（50mV/div~200mV/div）,

DC~12MHz（500mV/div~20V/div）20V/div The above is for reference only

Maximum equivalent sampling rate: 50Msps

Number of channels: 1

Input resistance: 5MΩ

Vertical sensitivity range:500mV~200V/div

Time base range:200ns~10s/div

Vertical range accuracy: ±(5%+0.2div)

Time base accuracy:±(0.01%+0.1div)

Scan mode:auto/normal/single

Trigger edge selection:Rising/falling edge

Automatic settings:Automatic setting of time base and vertical range

Automatic measurement function: Vp-p, Vavg, Vrms, Hz

Signal Source parameters

Sine wave frequency: 100Hz~100kHz (fixed-point output in 1-2-5 steps)

Square wave frequency: 100Hz~20kHz (fixed-point output in 1-2-5 steps)

Triangular wave frequency: 100Hz~50kHz (fixed-point output in 1-2-5 step mode)

Output amplitude:3Vpp、2.5Vpp、2Vpp、1.5Vpp、1Vpp、0.5Vpp、0.4Vpp、0.3Vpp、0.2Vpp、0.1Vpp、0Vpp

Multimeter parameters

DC voltage: 60.00mV/600.0mV/600mV/6V/60V/600V/1000V

AC voltage: 60.00mV/600.0mV/600mV/6V/60V/600V/750V

DC current: 600.0uA/6000uA/60mA/600mA/6A/10A

AC current: 600uA/6000uA/60mA/600mA/6A/10A

Resistance: 600Ω/6kΩ/60kΩ/600kΩ/6MΩ/60MΩ

Capacitance:99.99nF/999.9nF/9.99μF/99.99μF/999.9μF/9.999mF/99.99mF

Frequency: 1.000Hz~20.00MHz

Diode/on/off test: Open circuit voltage about 2.8V; judgment resistance about 50Ω

Fuse:750mA/250V ,10A/250V

Operation mode: AUTO/manual

3 in 1 Oscilloscope + Multimeter + Signal Source